Bank check OCR with OpenCV and Python (Part II)

Today’s blog post is Part II in our two part series on OCR’ing bank check account and routing numbers using OpenCV, Python, and computer vision techniques.

Last week we learned how to extract MICR E-13B digits and symbols from input images. Today we are going to take this knowledge and use it to actually recognize each of the characters, thereby allowing us to OCR the actual bank check and routing number.

To learn how to OCR bank checks with Python and OpenCV, just keep reading.

Looking for the source code to this post?
Jump right to the downloads section.

Bank check OCR with OpenCV and Python

In Part I of this series we learned how to localize each of the fourteen MICR E-13B font characters used on bank checks.

Ten of these characters are digits, which form our actual account number and routing number. The remaining four characters are special symbols used by the bank to mark separations between routing numbers, account numbers, and any other information encoded on the check.

The image below displays all fourteen characters that we will be OCR’ing in this tutorial:

Figure 1: The fourteen MICR E-13B characters used in bank checks. We will write Python + OpenCV code to recognize each of these characters.

The list below displays the four symbols:

• ⑆ Transit (delimit bank branch routing transit #)
• ⑈ On-us (delimit customer account number)
• ⑇ Amount (delimit transaction amount)
• ⑉ Dash (delimit parts of numbers, such as routing or account)

Since OpenCV does not allow us to draw Unicode characters on images, we’ll use the following ASCII character mappings in our code to indicate the Transit, Amount, On-us, and Dash:

• T = ⑆
• U = ⑈
• A = ⑇
• D = ⑉

Now that we are able to actually localize the digits and symbols, we can apply template matching in a similar manner as we did in our credit card OCR post in order to perform OCR.

Reading account and routing numbers using OpenCV

In order to build our bank check OCR system, we’ll be reusing some of the code from last week. If you haven’t already read Part I of this series, take the time now to go back and read through it — the explanation of the

extract_digitis_and_symbols

  function is especially important and critical to localizing the bank check characters.

With that said, let’s go ahead and open a new file, name it

bank_check_ocr.py

 , and insert the following code:

# import the necessary packages
from skimage.segmentation import clear_border
from imutils import contours
import numpy as np
import argparse
import imutils
import cv2

Lines 2-7 handle our standard imports. If you’re familiar with this blog, these imports should be nothing new. If you don’t have any of these packages on your system, you can perform the following to get them installed:

1. Install OpenCV using the relevant instructions for your system (while ensuring you’re following any Python virtualenv commands).
2. Activate your Python virtualenv and install packages:

   1. $ workon cv
      

   2. $ pip install numpy
      

   3. $ pip install skimage
      

   4. $ pip install imutils
      

Note: for any of the pip commands you may use the

--upgrade

  flag to update whether or not you already have the software installed.

Now that we’ve got our dependencies installed, let’s quickly review the function covered last week in Part I of this series:

def extract_digits_and_symbols(image, charCnts, minW=5, minH=15):
        # grab the internal Python iterator for the list of character
        # contours, then  initialize the character ROI and location
        # lists, respectively
        charIter = charCnts.__iter__()
        rois = []
        locs = []

        # keep looping over the character contours until we reach the end
        # of the list
        while True:
                try:
                        # grab the next character contour from the list, compute
                        # its bounding box, and initialize the ROI
                        c = next(charIter)
                        (cX, cY, cW, cH) = cv2.boundingRect(c)
                        roi = None

                        # check to see if the width and height are sufficiently
                        # large, indicating that we have found a digit
                        if cW >= minW and cH >= minH:
                                # extract the ROI
                                roi = image[cY:cY + cH, cX:cX + cW]
                                rois.append(roi)
                                locs.append((cX, cY, cX + cW, cY + cH))

This function has one goal — to find and localize digits and symbols based on contours. This is accomplished via iterating through the contours list,

charCnts

 , and keeping track of the regions of interest and ROI locations (

rois

  and

locs

 ) in two lists that are returned at the end of the function.

On Line 29 we check to see if the bounding rectangle of the contour is at least as wide and tall as a digit. If it is, we extract and append the

roi

  (Lines 31 and 32) followed by appending the location of the ROI to

locs

  (Line 33). Otherwise, we take the following actions:

# otherwise, we are examining one of the special symbols
                        else:
                                # MICR symbols include three separate parts, so we
                                # need to grab the next two parts from our iterator,
                                # followed by initializing the bounding box
                                # coordinates for the symbol
                                parts = [c, next(charIter), next(charIter)]
                                (sXA, sYA, sXB, sYB) = (np.inf, np.inf, -np.inf,
                                        -np.inf)

                                # loop over the parts
                                for p in parts:
                                        # compute the bounding box for the part, then
                                        # update our bookkeeping variables
                                        (pX, pY, pW, pH) = cv2.boundingRect(p)
                                        sXA = min(sXA, pX)
                                        sYA = min(sYA, pY)
                                        sXB = max(sXB, pX + pW)
                                        sYB = max(sYB, pY + pH)

                                # extract the ROI
                                roi = image[sYA:sYB, sXA:sXB]
                                rois.append(roi)
                                locs.append((sXA, sYA, sXB, sYB))

In the above code block, we have determined that a contour is part of a special symbol (such as Transit, Dash, etc.). In this case, we take the current contour and the

next

  two contours (using Python iterators which we discussed last week) on Line 41.

These

parts

  of a special symbol are looped over so that we can calculate the bounding box for extracting the 

roi

 around all three contours (Lines 46-53). Then, as we did before, we extract the

roi

  and append it to

rois

  (Lines 56 and 57) followed by appending its location to

locs

  (Line 58).

Finally, we need to catch a

StopIteration

  exception to gracefully exit our function:

# we have reached the end of the iterator; gracefully break
                # from the loop
                except StopIteration:
                        break

        # return a tuple of the ROIs and locations
        return (rois, locs)

Once we have reached the end of the

charCnts

  list (and there are no further entries in the list), a

next

  call on

charCnts

  will result in a

StopIteration

  exception being throw. Catching this exception allows us to

break

  from our loop (Lines 62 and 63).

Finally, we return a 2-tuple containing

rois

  and corresponding

locs

 .

That was a quick recap of the

extract_digits_and_symbols

  function — for a complete, detailed review, please refer to last week’s blog post.

Now it’s time to get to the new material. First, we’ll go through a couple code blocks that should also be a bit familiar:

# construct the argument parse and parse the arguments
ap = argparse.ArgumentParser()
ap.add_argument("-i", "--image", required=True,
        help="path to input image")
ap.add_argument("-r", "--reference", required=True,
        help="path to reference MICR E-13B font")
args = vars(ap.parse_args())

Lines 69-74 handle our command line argument parsing. In this script, we’ll make use of both the input

--image

  and

--reference

  MICR E-13B font image.

Let’s initialize our special characters (since they can’t be represented with Unicode in OpenCV) as well as pre-process our reference image:

# initialize the list of reference character names, in the same
# order as they appear in the reference image where the digits
# their names and:
# T = Transit (delimit bank branch routing transit #)
# U = On-us (delimit customer account number)
# A = Amount (delimit transaction amount)
# D = Dash (delimit parts of numbers, such as routing or account)
charNames = ["1", "2", "3", "4", "5", "6", "7", "8", "9", "0",
        "T", "U", "A", "D"]

# load the reference MICR image from disk, convert it to grayscale,
# and threshold it, such that the digits appear as *white* on a
# *black* background
ref = cv2.imread(args["reference"])
ref = cv2.cvtColor(ref, cv2.COLOR_BGR2GRAY)
ref = imutils.resize(ref, width=400)
ref = cv2.threshold(ref, 0, 255, cv2.THRESH_BINARY_INV |
        cv2.THRESH_OTSU)[1]

Lines 83 and 84 build a list of the character names including digits and special symbols.

Then, we load the

--reference

  image while converting to grayscale and resizing, followed by inverse thresholding (Lines 89-93).

Below you can see the output of pre-processing our reference image:

Figure 2: The MICR E-13B font for the digits 0-9 and four special symbols. We will be using this font along with template matching to OCR our bank check images.

Now we’re ready to find and sort contours in

ref

 :

# find contours in the MICR image (i.e,. the outlines of the
# characters) and sort them from left to right
refCnts = cv2.findContours(ref.copy(), cv2.RETR_EXTERNAL,
        cv2.CHAIN_APPROX_SIMPLE)
refCnts = refCnts[0] if imutils.is_cv2() else refCnts[1]
refCnts = contours.sort_contours(refCnts, method="left-to-right")[0]

Reference image contours are computed on Lines 97 and 98 followed by updating the

refCnts

  depending on which OpenCV version we are running (Line 99).

We sort the

refCnts

  from left to right on Line 100.

At this point, we have our reference contours in an organized fashion. The next step is to extract the digits and symbols followed by building a dictionary of character ROIs:

# extract the digits and symbols from the list of contours, then
# initialize a dictionary to map the character name to the ROI
refROIs = extract_digits_and_symbols(ref, refCnts,
        minW=10, minH=20)[0]
chars = {}

# loop over the reference ROIs
for (name, roi) in zip(charNames, refROIs):
        # resize the ROI to a fixed size, then update the characters
        # dictionary, mapping the character name to the ROI
        roi = cv2.resize(roi, (36, 36)) 
        chars[name] = roi

We call the

extract_digits_and_symbols

  function on Lines 104 and 105 providing the

ref

  image and

refCnts

 .

We then initialize a

chars

  dictionary on Line 106. We populate this dictionary in the loop spanning Lines 109-113. In the dictionary, the character

name

(key)  is associated with the

roi

  image (value).

Next, we’ll instantiate a kernel and load and extract the bottom 20% of the check image which contains the account number:

# initialize a rectangular kernel (wider than it is tall) along with
# an empty list to store the output of the check OCR
rectKernel = cv2.getStructuringElement(cv2.MORPH_RECT, (17, 7))
output = []

# load the input image, grab its dimensions, and apply array slicing
# to keep only the bottom 20% of the image (that's where the account
# information is)
image = cv2.imread(args["image"])
(h, w,) = image.shape[:2]
delta = int(h - (h * 0.2))
bottom = image[delta:h, 0:w]

We’ll apply a rectangular kernel to perform some morphological operations (initialized on Line 117). We also initialize an

output

  list to contain the characters at the bottom of the check. We’ll print these characters to the terminal and also draw them on the check image later.

Lines 123-126 simply load the

image

 , grab the dimensions, and extract the bottom 20% of the check image.

Note: This is not rotation invariant — if your check could possibly be rotated, appearing upside down or vertical, then you will need to add logic in to rotate it first. Applying a top-down perspective transform on the check (such as in our document scanner post) can help with task.

Below you can find our example check input image:

Figure 3: The example input bank check that we are going to OCR and extract the routing number and account number from (source).

Next, let’s convert the check to grayscale and apply a morphological transformation:

# convert the bottom image to grayscale, then apply a blackhat
# morphological operator to find dark regions against a light
# background (i.e., the routing and account numbers)
gray = cv2.cvtColor(bottom, cv2.COLOR_BGR2GRAY)
blackhat = cv2.morphologyEx(gray, cv2.MORPH_BLACKHAT, rectKernel)

On Line 131 we convert the bottom of the check image to grayscale and on Line 132 we use the blackhat morphological operator to find dark regions against a light background. This operation makes use of our

rectKernel

 .

The result reveal our account and routing numbers:

Figure 5: Applying black hat morphological operation reveals our bank account number and routing number from the rest of the check.

 

Now let’s compute the Scharr gradient in the x-direction:

# compute the Scharr gradient of the blackhat image, then scale
# the rest back into the range [0, 255]
gradX = cv2.Sobel(blackhat, ddepth=cv2.CV_32F, dx=1, dy=0,
        ksize=-1)
gradX = np.absolute(gradX)
(minVal, maxVal) = (np.min(gradX), np.max(gradX))
gradX = (255 * ((gradX - minVal) / (maxVal - minVal)))
gradX = gradX.astype("uint8")

Using our blackhat operator, we compute the Scharr gradient with the

cv2.Sobel

  function (Lines 136 and 137). We take the element-wise absolute value of

gradX

  on on Line 138.

Then we scale the

gradX

  to the range [0-255] on Lines 139-141:

Figure 6: Computing the Scharr gradient magnitude representation of the bank check image reveals vertical changes in the gradient.

Let’s see if we can close the gaps between the characters and binarize the image:

# apply a closing operation using the rectangular kernel to help
# cloes gaps in between rounting and account digits, then apply
# Otsu's thresholding method to binarize the image
gradX = cv2.morphologyEx(gradX, cv2.MORPH_CLOSE, rectKernel)
thresh = cv2.threshold(gradX, 0, 255,
        cv2.THRESH_BINARY | cv2.THRESH_OTSU)[1]

On Line 146, we utilize our kernel again while applying a closing operation. We follow this by performing a binary threshold on Lines 147 and 148.

The result of this operation can be seen below:

Figure 7: Thresholding our gradient magnitude representation reveals possible regions that contain the bank check account number and routing number.

When pre-processing a check image our morphological + thresholding operations will undoubtedly leave “false-positive” detection regions — we can apply a bit of extra processing to help remove these operations:

# remove any pixels that are touching the borders of the image (this
# simply helps us in the next step when we prune contours)
thresh = clear_border(thresh)

Line 152 simply clears the border by removing image border pixels; the result is subtle but will prove to be very helpful:

Figure 8: To help remove noise we can clear any connected components that lie on the border of the image.

As the image above displays, we have clearly four our three groupings of numbers on the check. But how did we go about actually extracting each of the individual groups? The following code block will show us how:

# find contours in the thresholded image, then initialize the
# list of group locations
groupCnts = cv2.findContours(thresh.copy(), cv2.RETR_EXTERNAL,
        cv2.CHAIN_APPROX_SIMPLE)
groupCnts = groupCnts[0] if imutils.is_cv2() else groupCnts[1]
groupLocs = []

# loop over the group contours
for (i, c) in enumerate(groupCnts):
        # compute the bounding box of the contour
        (x, y, w, h) = cv2.boundingRect(c)

        # only accept the contour region as a grouping of characters if
        # the ROI is sufficiently large
        if w > 50 and h > 15:
                groupLocs.append((x, y, w, h))

# sort the digit locations from left-to-right
groupLocs = sorted(groupLocs, key=lambda x:x[0])

On Lines 156-158 we find our contours also take care of the pesky OpenCV version incompatibility.

Next, we initialize a list to contain our number group locations (Line 159).

Looping over the

groupCnts

 , we determine the contour bounding box (Line 164), and check to see if the box parameters qualify as a grouping of characters — if they are, we append the ROI values to

groupLocs

  (Lines 168 and 169).

Using lambdas, we sort the digit locations from left to right (Line 172).

Our group regions are shown on this image:

Figure 9: Applying contour filtering allows us to find the (1) account number, (2) routing number, and (3) additional information groups on the bank check.

Next, let’s loop over the group locations:

# loop over the group locations
for (gX, gY, gW, gH) in groupLocs:
        # initialize the group output of characters
        groupOutput = []

        # extract the group ROI of characters from the grayscale
        # image, then apply thresholding to segment the digits from
        # the background of the credit card
        group = gray[gY - 5:gY + gH + 5, gX - 5:gX + gW + 5]
        group = cv2.threshold(group, 0, 255,
                cv2.THRESH_BINARY_INV | cv2.THRESH_OTSU)[1]

        cv2.imshow("Group", group)
        cv2.waitKey(0)

        # find character contours in the group, then sort them from
        # left to right
        charCnts = cv2.findContours(group.copy(), cv2.RETR_EXTERNAL,
                cv2.CHAIN_APPROX_SIMPLE)
        charCnts = charCnts[0] if imutils.is_cv2() else charCnts[1]
        charCnts = contours.sort_contours(charCnts,
                method="left-to-right")[0]

In the loop, first, we initialize a

groupOutput

  list which will later be appended to the

output

  list (Line 177).

Subsequently, we extract the character grouping ROI from the image (Line 182) and threshold it (Lines 183 and 184).

For developmental and debugging purposes (Lines 186 and 187) we show the group to the screen and wait for a keypress before moving onward (feel free to remove this code from your script if you so wish).

We find and sort character contours within the group on Lines 191-195. The results of this step are shown in Figure 10.

 

Figure 10: By using the (x, y)-coordinates of the locations, we can extract each group from the thresholded image. Given the group, contour detection allows us to detect each individual character.

Now, let’s extract digits and symbols with our function and then loop over the

rois

 :

# find the characters and symbols in the group
        (rois, locs) = extract_digits_and_symbols(group, charCnts)

        # loop over the ROIs from the group
        for roi in rois:
                # initialize the list of template matching scores and
                # resize the ROI to a fixed size
                scores = []
                roi = cv2.resize(roi, (36, 36))

                # loop over the reference character name and corresponding
                # ROI
                for charName in charNames:
                        # apply correlation-based template matching, take the
                        # score, and update the scores list
                        result = cv2.matchTemplate(roi, chars[charName],
                                cv2.TM_CCOEFF)
                        (_, score, _, _) = cv2.minMaxLoc(result)
                        scores.append(score)

                # the classification for the character ROI will be the
                # reference character name with the *largest* template
                # matching score
                groupOutput.append(charNames[np.argmax(scores)])

On Line 198, we provide the

group

  and

charCnts

  to the

extract_digits_and_symbols

  function, which returns

rois

  and

locs

 .

We loop over the

rois

 , first initializing a template matching score list, followed by resizing the

roi

  to known dimensions.

We loop over the character names and perform template matching which compares the query image

roi

  to the possible character images (they are stored in the

chars

  dictionary and indexed by

charName

 ) on Lines 212 and 213.

To extract a template matching

score

  for this operation, we use the

cv2.minMaxLoc

  function, and subsequently, we append it to

scores

  on Line 215.

The last step in this code block is to take the maximum

score

  from

scores

  and use it to find the character name — we append the result to

groupOutput

  (Line 220).

You can read more about this template matching-based approach to OCR in our previous blog post on Credit Card OCR.

Next, we’ll draw on the original

image

  append the

groupOutput

  result to a list named

output

 .

# draw (padded) bounding box surrounding the group along with
        # the OCR output of the group
        cv2.rectangle(image, (gX - 10, gY + delta - 10),
                (gX + gW + 10, gY + gY + delta), (0, 0, 255), 2)
        cv2.putText(image, "".join(groupOutput),
                (gX - 10, gY + delta - 25), cv2.FONT_HERSHEY_SIMPLEX,
                0.95, (0, 0, 255), 3)

        # add the group output to the overall check OCR output
        output.append("".join(groupOutput))

Lines 224 and 225 handle drawing a red rectangle around the

groups

  and Lines 226-228 draw the group output characters (routing, checking, and check numbers) on the image.

Finally, we append the

groupOutput

  characters to an

output

  string (Line 231).

Our final step is to write the OCR text to our terminal and display the final output image:

# display the output check OCR information to the screen
print("Check OCR: {}".format(" ".join(output)))
cv2.imshow("Check OCR", image)
cv2.waitKey(0)

We print the OCR results to the terminal, display the image to the screen, and wait until a key is pressed to exit on Lines 234-236.

Let’s see how our bank check OCR system performs in the next section.

Bank check OCR results

To apply our bank check OCR algorithm, make sure you use the “Downloads” section of this blog post to download the source code + example image.

From there, execute the following command:

$ python bank_check_ocr.py --image example_check.png \
        --reference micr_e13b_reference.png

The results of our hard work can be seen below:

Figure 11: Using OpenCV and Python, we have been able to correctly OCR our bank account number and routing number from an image of a check.

Improving our bank check OCR system

In this particular example, we were able to get away with using basic template matching as our character recognition algorithm.

However, template matching is not the most reliable method for character recognition, especially for real-world images that are likely to be much noisier and harder to segment.

In these cases, it would be best to train your own HOG + Linear SVM classifier or a Convolutional Neural Network. To accomplish this, you’ll want to create a dataset of check images and manually label and extract each digit in the image. I would recommend having 1,000-5,000 digits per character and then training your classifier.

From there, you’ll be able to enjoy much higher character classification accuracy — the biggest problem is simply creating/obtaining such a dataset.

Since checks by their very nature contain sensitive information, it’s often hard to find a dataset that is not only (1) representative of real-world bank check images but is also (2) cheap/easy to license.

Many of these datasets belong to the banks themselves, making it hard for computer vision researchers and developers to work with them.

Summary

In today’s blog post we learned how to apply back check OCR to images using OpenCV, Python, and template matching. In fact, this is the same method that we used for credit card OCR — the primary difference is that we had to take special care to extract each MICR E-13B symbol, especially when these symbols contain multiple contours.

However, while our template matching method worked correctly on this particular example image, real-world inputs are likely to be much more noisy, making it harder for us to extract the digits and symbols using simple contour techniques.

In these situations, it would be best to localize each of the digits and characters followed by applying machine learning to obtain higher digit classification accuracy. Methods such as Histogram of Oriented Gradients + Linear SVM and deep learning will obtain better digit and symbol recognition accuracy on real-world images that contain more noise.

If you are interested in learning more about HOG + Linear SVM along with deep learning, be sure to take a look at the PyImageSearch Gurus course.

And before you go, be sure to enter your email address in the form below to be notified when future blog posts are published!

Downloads:

If you would like to download the code and images used in this post, please enter your email address in the form below. Not only will you get a .zip of the code, I’ll also send you a FREE 11-page Resource Guide on Computer Vision and Image Search Engines, including exclusive techniques that I don’t post on this blog! Sound good? If so, enter your email address and I’ll send you the code immediately!

Email address:

The post Bank check OCR with OpenCV and Python (Part II) appeared first on PyImageSearch.

from PyImageSearch http://ift.tt/2we3yDs
via IFTTT