Configuring Ubuntu for deep learning with Python

When it comes to learning new technology such as deep learning, configuring your development environment tends to be half the battle. Different operating systems, hardware, dependencies, and the actual libraries themselves can lead to many headaches before you’re even able to get started studying deep learning.

These issues are further compounded by the speed of deep learning library updates and releases — new features push innovation, but oftentimes break previous versions. Your environment can quickly become obsolete, so it is imperative to become an expert in installing and configuring your deep learning environment.

Now that Deep Learning for Computer Vision with Python has officially released, I’ll be publishing three posts this week where I will demonstrate how to stand up your own deep learning environments so that you can get a head start before you dive into reading.

I’ll be demonstrating how to configure your own native development environment for the following operating systems and peripherals:

• Configuring Ubuntu for deep learning with Python (i.e., the post you are currently reading)
• Setting up Ubuntu (with GPU support) for deep learning with Python
• Configuring macOS for deep learning with Python

As you start to walk the path to deep learning and computer vision mastery, I’ll be right there with you.

To get started configuring your Ubuntu machine for deep learning with Python, just keep reading.

Configuring Ubuntu for deep learning with Python

Accompanying my new deep learning book is a downloadable pre-configured Ubuntu VirtualBox virtual machine with Keras, TensorFlow, OpenCV, and other computer vision/machine learning libraries pre-installed. By far, this is the fastest way to get up and running with Deep Learning for Computer Vision with Python.

That being said, it is often desirable to install your environment on the bare metal so that you can take advantage of your physical hardware. For the GPU install tutorial part of this series it is a requirement that you be on the metal — a VM just won’t cut it since it doesn’t have access to your physical GPU.

Today, our blog post is broken down into four relatively easy steps:

1. Step #1: Install Ubuntu system dependencies
2. Step #2: Create your Python 3 virtual environment
3. Step #3: Compile and Install OpenCV
4. Step #4: Install Keras

Taking note of the steps, you will see that Deep Learning for Computer Vision with Python supports Python 3.

Python 3 will be the standard on PyImageSearch going forward as it is stable and quite frankly the future. Many organizations have been hesitant to adopt Python 3 at first (me included, as there was no Python 3 support for OpenCV until OpenCV 3), but at this point if you don’t adopt Python 3 you will be left in the dust. Expect PyImageSearch Gurus course content to be compatible with Python 3 in the near future as well.

Notice that we have chosen Keras as our deep learning library. Keras “stands out from the rest” of the available libraries for it’s ease of use and compatibility with both Tensorflow and Theano.

My deep learning book focuses on fundamentals and breaking into the field with ease rather than introducing you to a bunch of libraries — so for the Starter Bundle and Practitioner Bundle, I demonstrate various tasks and exercises with Keras (as well as implementing some basic neural network concepts by hand). The ImageNet Bundle takes advantage of mxnet as well.

While we will be primarily using Keras in my book, there are many deep learning libraries for Python, and I encourage you to become familiar with my top 9 favorite Python deep learning libraries.

To get started, you’ll want to have some time on your hands and access to an Ubuntu machine’s terminal — SSH is perfectly suitable if your box is in the cloud or elsewhere. Let’s begin!

Step #1: Install Ubuntu system dependencies

The purpose of this step is to prepare your system with the dependencies necessary for OpenCV.

All steps in this tutorial will be accomplished by using your terminal. To start, open up your command line and update the 

apt-get

  package manager to refresh and upgrade and pre-installed packages/libraries:

$ sudo apt-get update
$ sudo apt-get upgrade

We’ll also need to install some developer tools as well as prerequisites required for image and video I/O, optimizations, and creating plots/visualizations:

$ sudo apt-get install build-essential cmake git unzip pkg-config
$ sudo apt-get install libjpeg-dev libtiff5-dev libjasper-dev libpng12-dev
$ sudo apt-get install libavcodec-dev libavformat-dev libswscale-dev libv4l-dev
$ sudo apt-get install libxvidcore-dev libx264-dev
$ sudo apt-get install libgtk-3-dev
$ sudo apt-get install libhdf5-serial-dev graphviz
$ sudo apt-get install libopenblas-dev libatlas-base-dev gfortran
$ sudo apt-get install python-tk python3-tk python-imaging-tk

We’ll wrap up Step #1 by installing the Python development headers and libraries for both Python 2.7 and Python 3.5 (that way you have both).

$ sudo apt-get install python2.7-dev python3-dev

Note: If you do not install the Python development headers and static library, you’ll run into issues during Step #3 where we run 

cmake

  to configure our build. If these headers are not installed, then the 

cmake

  command will be unable to automatically determine the proper values of the Python interpreter and Python libraries. In short, the output of this section will look “empty” and you will not be able to build the Python bindings. When you get to Step #3, take the time to compare your output of the command to mine.

Let’s continue on by creating a virtual environment to house OpenCV and Keras.

Step #2: Create your Python virtual environment

In this section we will setup a Python virtual environment on your system.

Installing pip

We are now ready to start configuring our Python development environment for the build. The first step is to install

pip

 , a Python package manager:

$ wget http://ift.tt/1mn7OFn
$ sudo python get-pip.py
$ sudo python3 get-pip.py

Installing virtualenv and virtualenvwrapper

I’ve mentioned this in every single install tutorial I’ve ever done, but I’ll say it again here today: I’m a huge fan of both virtualenv and virtualenvwrapper. These Python packages allow you to create separate, independent Python environments for eachproject that you are working on.

In short, using these packages allows you to solve the “Project X depends on version 1.x, but Project Y needs 4.x dilemma. A fantastic side effect of using Python virtual environments is that you can keep your system Python neat, tidy, and free from clutter.

While you can certainly install OpenCV with Python bindings without Python virtual environments, I highly recommend you use them as other PyImageSearch tutorials leverage Python virtual environments. I’ll also be assuming that you have both 

virtualenv

  and 

virtualenvwrapper

  installed throughout the remainder of this guide.

If you would like a full, detailed explanation on why Python virtual environments are a best practice, you should absolutely give this excellent blog post on RealPython a read. I also provide some commentary on why I personally prefer Python virtual environments in the first half of this tutorial.

Again, let me reiterate that it’s standard practice in the Python community to be leveraging virtual environments of some sort, so I suggest you do the same:

$ sudo pip install virtualenv virtualenvwrapper
$ sudo rm -rf ~/.cache/pip get-pip.py

Once we have 

virtualenv

  and 

virtualenvwrapper

  installed, we need to update our

~/.bashrc

  file to include the following lines at the bottom of the file:

# virtualenv and virtualenvwrapper
export WORKON_HOME=$HOME/.virtualenvs
export VIRTUALENVWRAPPER_PYTHON=/usr/bin/python3
source /usr/local/bin/virtualenvwrapper.sh

The

~/.bashrc

  file is simply a shell script that Bash runs whenever you launch a new terminal. You normally use this file to set various configurations. In this case, we are setting an environment variable called 

WORKON_HOME

   to point to the directory where our Python virtual environments live. We then load any necessary configurations from 

virtualenvwrapper

  .

To update your 

~/.bashrc

  file simply use a standard text editor. I would recommend using 

nano

  , 

vim

  , or

emacs

 . You can also use graphical editors as well, but if you’re just getting started, 

nano

  is likely the easiest to operate.

A more simple solution is to use the 

cat

  command and avoid editors entirely:

$ echo -e "\n# virtualenv and virtualenvwrapper" >> ~/.bashrc
$ echo "export WORKON_HOME=$HOME/.virtualenvs" >> ~/.bashrc
$ echo "export VIRTUALENVWRAPPER_PYTHON=/usr/bin/python3" >> ~/.bashrc
$ echo "source /usr/local/bin/virtualenvwrapper.sh" >> ~/.bashrc

After editing our

~/.bashrc

  file, we need to reload the changes:

$ source ~/.bashrc

Note: Calling

source

on

~/.bashrc

only has to be done once for our current shell session. Anytime we open up a new terminal, the contents of

~/.bashrc

  will be automatically executed (including our updates).

Creating a virtual environment for deep learning and computer vision

Now that we have installed 

virtualenv

  and

virtualenvwrapper

, the next step is to actually create the Python virtual environment — we do this using the 

mkvirtualenv

  command.

In past install tutorials, I’ve presented the choice of Python 2.7 or Python 3. At this point in the Python 3 development cycle, I consider it stable and the right choice. You may elect to use Python 2.7 if you have specific compatibility requirements, but for the purposes of my new deep learning book we will use Python 3.

With that said, for the following command, ensure your Python (

-p

 ) flag is set to

python3

:

$ mkvirtualenv dl4cv -p python3

Regardless of which Python version you decide to use, the end result is that we have created a Python virtual environment named 

dl4cv

  (short for “deep learning for computer vision”).

You can name this virtual environment whatever you like (and create as many Python virtual environments as you want), but for the time being, I would suggest sticking with the

dl4cv

  name as that is what I’ll be using throughout the rest of this tutorial as well as the remaining install guides in this series.

Verifying that you are in the “dl4cv” virtual environment

If you ever reboot your Ubuntu system; log out and log back in; or open up a new terminal, you’ll need to use the

workon

  command to re-access your

dl4cv

  virtual environment. An example of the

workon

  command follows:

$ workon dl4cv

To validate that you are in the

dl4cv

  virtual environment, simply examine your command line — if you see the text

(dl4cv)

  preceding your prompt, then you are in the

dl4cv

  virtual environment:

Figure 1: Inside the dl4cv virtual environment denoted by ‘(dl4cv)’ in the prompt.

Otherwise if you do not see the

dl4cv

  text, then you are not in the

dl4cv

  virtual environment:

Figure 2: Outside of the dl4cv virtual environment. Simply execute the ‘workon dl4cv’ command to get into the environment.

Installing NumPy

The final step before we compile OpenCV is to install NumPy, a Python package used for numerical processing. To install NumPy, ensure you are in the

dl4cv

  virtual environment (otherwise NumPy will be installed into the system version of Python rather than the 

dl4cv

  environment).

From there execute the following command:

$ pip install numpy

Step #3: Compile and Install OpenCV

In this section we will install and compile OpenCV. We’ll start by downloading and unarchiving OpenCV 3.3. Then we will build and compile OpenCV from source. Finally we will test that OpenCV has been installed.

Downloading OpenCV

First let’s download opencv and opencv_contrib into your home directory:

$ cd ~
$ wget -O opencv.zip http://ift.tt/2x4vwWB
$ wget -O opencv_contrib.zip http://ift.tt/2xIPYcC

You may need to expand the commands above to copy and past the full path to the

opencv_contrib

  file.

Then, let’s unzip both files:

$ unzip opencv.zip
$ unzip opencv_contrib.zip

Running CMake

Let’s create a

build

  directory and run CMake:

$ cd ~/opencv-3.3.0/
$ mkdir build
$ cd build
$ cmake -D CMAKE_BUILD_TYPE=RELEASE \
    -D CMAKE_INSTALL_PREFIX=/usr/local \
    -D WITH_CUDA=OFF \
    -D INSTALL_PYTHON_EXAMPLES=ON \
    -D OPENCV_EXTRA_MODULES_PATH=~/opencv_contrib-3.3.0/modules \
    -D BUILD_EXAMPLES=ON ..

For CMake, it is important that your flags match mine for compatibility. Also, make sure that your

opencv_contrib

  version is the exact same as the OpenCV version you downloaded (in this case version

3.3.0

).

Before we move on to the actual compilation step make sure you examine the output of CMake!

Start by scrolling to the section titled

Python 3

 .

Make sure that your Python 3 section looks like the figure below:

Figure 3: Checking that Python 3 will be used when compiling OpenCV 3 for Ubuntu.

Pay attention that the Interpreter points to our

python3.5

  binary located in the

dl4cv

  virtual environment while

numpy

  points to our NumPy install.

In either case if you do not see the

dl4cv

  virtual environment in these variables’ paths, then it’s almost certainly because you are NOT in the

dl4cv

  virtual environment prior to running CMake!

If this is the case, access the

dl4cv

  virtual environment using

workon dl4cv

  and re-run the command outlined above (I would also suggest deleting the

build

  directory and re-creating it).

Compiling OpenCV

Now we are now ready to compile OpenCV with 4 cores:

$ make -j4

Note: You can try a version of the

-j4

  flag corresponding to the number of cores of your CPU to achieve compile time speedups. In this case I used

-j4

  since my machine has four cores. If you run into compilation errors, you may run the command

make clean

  and then just compile without the parallel flag:

make

 .

From there, all you need to do is to install OpenCV 3.3 and then free up some disk space if you so desire:

$ sudo make install
$ sudo ldconfig
$ cd ~
$ rm -rf opencv-3.3.0 opencv.zip
$ rm -rf opencv_contrib-3.3.0 opencv_contrib.zip

When your compilation is complete you should see output that looks similar to the following:

Figure 4: OpenCV compilation is complete.

Symbolic linking OpenCV to your virtual environment

To sym-link our OpenCV bindings into the

dl4cv

  virtual environment, issue the following commands:

$ cd ~/.virtualenvs/dl4cv/lib/python3.5/site-packages/
$ ln -s /usr/local/lib/python3.5/site-packages/cv2.cpython-35m-x86_64-linux-gnu.so cv2.so
$ cd ~

Notice that I am using Python 3.5 in this example. If you are using Python 3.6 (or newer) you’ll want to update the paths to use your version of Python.

Secondly, your

.so

  file (i.e., the actual OpenCV bindings) may be some variant of what is shown above, so be sure to use the appropriate file by double-checking the path.

Testing your OpenCV 3.3 install

Now that we’ve got OpenCV 3.3 installed and linked, let’s do a quick sanity test to see if things work:

$ python
>>> import cv2
>>> cv2.__version__
'3.3.0'

Make sure you are in the

dl4cv

  virtual environment before firing up Python (

workon dl4cv

 ). When you print out the version, it should match the version of OpenCV that you installed (in our case, OpenCV

3.3.0

 ).

That’s it — assuming you didn’t encounter an import error, you’re ready to go on to Step #4 where we will install Keras.

Step #4: Install Keras

For this step, be sure that you are in the

dl4cv

  environment by issuing the

workon dl4cv

  command. Then install our various Python computer vision, image processing, and machine learning libraries:

$ pip install scipy matplotlib pillow
$ pip install imutils h5py requests progressbar2
$ pip install scikit-learn scikit-image

Next, install Tensorflow:

$ pip install tensorflow

Notice how we are using the CPU version of TensorFlow. I will be covering the GPU version in a separate tutorial.

Installing Keras is extremely simple, thanks to

pip

 :

$ pip install keras

Again, do this in the

dl4cv

  virtual environment.

You can test our Keras install from a Python shell:

$ python
>>> import keras
Using TensorFlow backend.
>>>

You should see that Keras has been imported with no errors and the TensorFlow backend is being used.

Before you wrap up the install tutorial take a second to familiarize yourself with the

~/.keras/keras.json

  file:

{
    "image_data_format": "channels_last",
    "backend": "tensorflow",
    "epsilon": 1e-07,
    "floatx": "float32"
}

Ensure that

image_data_format

  is set to

channels_last

  and

backend

  is

tensorflow

 .

Congratulations! You are now ready to begin your Deep learning for Computer Vision with Python journey.

Summary

In today’s blog post, I demonstrated how to set up your deep learning environment on an Ubuntu machine using only the CPU. Configuring your development environment is half the battle when it comes to learning new techniques, algorithms, and libraries.

If you’re interested in studying deep learning in more detail, be sure to take a look at my new book, Deep Learning for Computer Vision with Python.

The next few blog posts in this series will cover alternative environments including macOS and Ubuntu (with GPU support).

Of course, if you’re interested in pre-configured deep learning development environments, take a look my Ubuntu virtual machine and Amazon EC2 instance.

If you are interested in learning more about computer vision and deep learning, be sure to enter your email address in the form below to be notified when new blog posts + tutorials are published!

The post Configuring Ubuntu for deep learning with Python appeared first on PyImageSearch.

from PyImageSearch http://ift.tt/2y28Iao
via IFTTT